Headset Centring Cone

***  Buy one, get one 30% off any mix of pullers and presses (applies to individual tools only, not kits) ***

Our Headset Centring Cone is an optional upgrade for our Headset Cup Press.  The cone is used in place of one of the headset press drifts when pressing in the first headset cup or bearing, the taper of the cone ensuring that that end of the press is acurately aligned with the bore of the frame's headtube.

• Tapers from 25-63mm
• Compatible with our Headset Cup Press
  
• Shipping is fast and free in the UK
• Combined shipping for international customers buying more than of our extractors or presses

Our tools can be selected either by the bearing size or by the bearing's standard reference code.

Standard references take the form of a three or four digit number, such as 688, or 6902 for example. These codes are often moulded onto the bearing's seal. You might see something like 6902-2RS on the seal. The first digits are the standard reference.  The second part (2RS in this case) refers to the seal type and doesn't matter for tool selection.

Alternatively, tools can be selected by their inside (ID) and outside (OD) diameters and width.

Note that each tool is specific to one bearing size and can’t be used on bearings with different dimensions.

If you need any help then please feel free to email us.